Solary Infrared Curing Lamp - Model B1M2 Hand Held Infrared Light
- Powerful infrared light penetration directly into the inner paint layer. Completely drying double component paints within 15 minutes and polyester putty in 5 minutes.
- Portable design，convenient for curing feather edges, small spots, or drying in hard-to-reach areas.
- The Timer is next to the handle for a convenient start and shutdown. It also softens trim moldings when replacing windscreens or removing strips.
- Short-wave infrared emitter modules have high light-emitting efficiency. Switch CEUL certified, high quality, and stable performance.
- Long-life emitter life spans up to 6000 hours—even radiation.
High Heat Efficiency
Adopting short-wave infrared rays, it has high luminous efficiency and strong penetrating power. Due to its high thermal efficiency, it penetrates the coating layer. It dries from the inside to the outside, improving the surface gloss and adhesion of the coating and significantly reducing wrinkles and gaps.
Multipurpose
Widely used for sheet metal spray painting, partial paint drying, car spray painting, car film, etc. Auxiliary tool for car repair and maintenance
User Friendly
Perfect size and weight make it easy to carry
Product Specifications:
- Input voltage (50/60Hz): 110V 1Ph
- Emitter power (W): 1X 500
- Max Power (kVA): 1
- Baking area (㎡): 0.3x0.4
- Temperature (℃): 60 - 70
- Net weight(kg): 2.07
|
|
|
|
|---|---|---|
Multifunction
|
|
|
|
|
|---|---|---|---|
Answered Questions
I need a Replacement bulb; where can I get one?
Answer
Hello, you can buy the unique lamp matching IR series on this page, if you have other questions, you can click the message tool on the lower right corner to ask us. B2 Series Replacement bulb
Can this be effectively used to dry epoxy resins also?
Answer
Of course! This can be used effectively for drying epoxy resins. Our methods/products have been widely used to dry various types of resins, including epoxy resins. It will help you complete your work quickly and efficiently and ensure the quality and durability of the end result. If you have any additional questions or need more information, please feel free to contact us, and we will be happy to serve you!
Does this get hot enough to cure powder coatings?
Answer
It gets hot enough to cure powder coatings effectively. Our product/method is designed to provide the precise temperature required for curing powder coatings, ensuring a durable and high-quality finish. You can trust it to meet your curing needs reliably.
Will this get up to 400 plus surface temp if insulated around the part with foil?
Answer
Hello, the temperature will gradually rise as the heating time increases. We have yet to test the situation you mentioned, so the safety in this situation cannot be fully guaranteed.
Technical Data
- Model: B1M2
- Input voltage (50/60Hz): 110V 1ph
- Emitter power (W): 1 x 500
- Max power (kVA): 0.5
- Baking area (m²): 0.3 x 0.4
- Temperature (°C): 60 - 70
- Net weight: 1.65 kg
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Solary Infrared Curing Lamp - Model B1M2 Hand Held Infrared Light
Solary Infrared Curing Lamp - Model B1M2 Hand Held Infrared Light
- Powerful infrared light penetration directly into the inner paint layer. Completely drying double component paints within 15 minutes and polyester putty in 5 minutes.
- Portable design，convenient for curing feather edges, small spots, or drying in hard-to-reach areas.
- The Timer is next to the handle for a convenient start and shutdown. It also softens trim moldings when replacing windscreens or removing strips.
- Short-wave infrared emitter modules have high light-emitting efficiency. Switch CEUL certified, high quality, and stable performance.
- Long-life emitter life spans up to 6000 hours—even radiation.
High Heat Efficiency
Adopting short-wave infrared rays, it has high luminous efficiency and strong penetrating power. Due to its high thermal efficiency, it penetrates the coating layer. It dries from the inside to the outside, improving the surface gloss and adhesion of the coating and significantly reducing wrinkles and gaps.
Multipurpose
Widely used for sheet metal spray painting, partial paint drying, car spray painting, car film, etc. Auxiliary tool for car repair and maintenance
User Friendly
Perfect size and weight make it easy to carry
Product Specifications:
- Input voltage (50/60Hz): 110V 1Ph
- Emitter power (W): 1X 500
- Max Power (kVA): 1
- Baking area (㎡): 0.3x0.4
- Temperature (℃): 60 - 70
- Net weight(kg): 2.07
|
|
|
|
|---|---|---|
Multifunction
|
|
|
|
|
|---|---|---|---|
Answered Questions
I need a Replacement bulb; where can I get one?
Answer
Hello, you can buy the unique lamp matching IR series on this page, if you have other questions, you can click the message tool on the lower right corner to ask us. B2 Series Replacement bulb
Can this be effectively used to dry epoxy resins also?
Answer
Of course! This can be used effectively for drying epoxy resins. Our methods/products have been widely used to dry various types of resins, including epoxy resins. It will help you complete your work quickly and efficiently and ensure the quality and durability of the end result. If you have any additional questions or need more information, please feel free to contact us, and we will be happy to serve you!
Does this get hot enough to cure powder coatings?
Answer
It gets hot enough to cure powder coatings effectively. Our product/method is designed to provide the precise temperature required for curing powder coatings, ensuring a durable and high-quality finish. You can trust it to meet your curing needs reliably.
Will this get up to 400 plus surface temp if insulated around the part with foil?
Answer
Hello, the temperature will gradually rise as the heating time increases. We have yet to test the situation you mentioned, so the safety in this situation cannot be fully guaranteed.
Technical Data
- Model: B1M2
- Input voltage (50/60Hz): 110V 1ph
- Emitter power (W): 1 x 500
- Max power (kVA): 0.5
- Baking area (m²): 0.3 x 0.4
- Temperature (°C): 60 - 70
- Net weight: 1.65 kg
$149.99
Solary Infrared Curing Lamp - Model B1M2 Hand Held Infrared Light—
$149.99
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Powerful infrared light penetration directly into the inner paint layer. Completely drying double component paints within 15 minutes and polyester putty in 5 minutes.
- Portable design，convenient for curing feather edges, small spots, or drying in hard-to-reach areas.
- The Timer is next to the handle for a convenient start and shutdown. It also softens trim moldings when replacing windscreens or removing strips.
- Short-wave infrared emitter modules have high light-emitting efficiency. Switch CEUL certified, high quality, and stable performance.
- Long-life emitter life spans up to 6000 hours—even radiation.
High Heat Efficiency
Adopting short-wave infrared rays, it has high luminous efficiency and strong penetrating power. Due to its high thermal efficiency, it penetrates the coating layer. It dries from the inside to the outside, improving the surface gloss and adhesion of the coating and significantly reducing wrinkles and gaps.
Multipurpose
Widely used for sheet metal spray painting, partial paint drying, car spray painting, car film, etc. Auxiliary tool for car repair and maintenance
User Friendly
Perfect size and weight make it easy to carry
Product Specifications:
- Input voltage (50/60Hz): 110V 1Ph
- Emitter power (W): 1X 500
- Max Power (kVA): 1
- Baking area (㎡): 0.3x0.4
- Temperature (℃): 60 - 70
- Net weight(kg): 2.07
|
|
|
|
|---|---|---|
Multifunction
|
|
|
|
|
|---|---|---|---|
Answered Questions
I need a Replacement bulb; where can I get one?
Answer
Hello, you can buy the unique lamp matching IR series on this page, if you have other questions, you can click the message tool on the lower right corner to ask us. B2 Series Replacement bulb
Can this be effectively used to dry epoxy resins also?
Answer
Of course! This can be used effectively for drying epoxy resins. Our methods/products have been widely used to dry various types of resins, including epoxy resins. It will help you complete your work quickly and efficiently and ensure the quality and durability of the end result. If you have any additional questions or need more information, please feel free to contact us, and we will be happy to serve you!
Does this get hot enough to cure powder coatings?
Answer
It gets hot enough to cure powder coatings effectively. Our product/method is designed to provide the precise temperature required for curing powder coatings, ensuring a durable and high-quality finish. You can trust it to meet your curing needs reliably.
Will this get up to 400 plus surface temp if insulated around the part with foil?
Answer
Hello, the temperature will gradually rise as the heating time increases. We have yet to test the situation you mentioned, so the safety in this situation cannot be fully guaranteed.
Technical Data
- Model: B1M2
- Input voltage (50/60Hz): 110V 1ph
- Emitter power (W): 1 x 500
- Max power (kVA): 0.5
- Baking area (m²): 0.3 x 0.4
- Temperature (°C): 60 - 70
- Net weight: 1.65 kg
